Polymist® and Algoflon® L PTFE micronized powders are free flowing powders used as additives in a wide range of materials such as thermoplastics, coatings and paints, inks, elastomers and lubricants (i.e., greases, oils, dry lubricants) to enhance processing or end-use performance characteristics.

Algoflon® L and Polymist® PTFE micronized powders can enhance some properties of the host material (i.e., plastics, coatings, inks, elastomers and lubricants) even when added in small amounts. This is because these micronized powders can resist the effects of hostile processing conditions and because they reside in the host resin with their properties virtually unchanged.

Used at low levels, Algoflon® L and Polymist® micronized powders provide:

• Internal lubrication
• Improved mold release
• Increased processing rates

In the case of plastics higher contents are requested when low friction, optimum PV value and resistance to wear are desired. Higher contents of these micronized powders are also needed when used as thickeners in lubricants (e.g., greases).

The processing conditions for PTFE filled compounds are identical to those of the host material (e.g., plastics, elastomers, etc.)

The use of Polymist® and Algoflon® L PTFE micronized powders enhances performance of the host material such as:

• Wear, rub and scratch resistance
• Release properties
• Anti-stick properties
• Lubrication
Anti-friction