Solvay Plastics is continuously exploring new technologies, developing new products and serving new markets.

Solvay Plastics is a leading world producer of specialty polymers. Each of these plastics contains a diverse assortment of materials. Polymerization techniques and additives (plasticizers, pigments, fillers, etc.) can enhance the properties of a single polymer (flow, mechanical strength, etc.).
Solvay Plastics is highly diversified, with markets developing on all five continents.

Aromatic Polyamides
High temperature/high performance nylons.
Amodel® (PPA)  - Ixef® (PARA) 

Fluorinated Coatings
Used for electrostatic powder coating or coil or spray applications
Halar® (ECTFE) - Hyflon® AD - Hyflon® (PFA & MFA) - Hylar® 5000 (PVDF) - Hylar® (PVDF) 

Fluorinated Fluids
Lubricants, greases, heat transfer fluids, surface treatment agents, surface modifiers and additives for greaseproof paper used in semiconductor, electronic, automotive, packaging, etc.
Fluorolink® (PFPE)  - Fomblin® (PFPE)  - Fomblin® HC (PFPE)  - Galden® (PFPE)  - H-Galden® (HFPE) - Solvera® (PFPE) 

Fluoroelastomers
Used for applications where temperature and chemical resistance, high purity and long service life are essential as O-rings, seals, gaskets and complex moulded parts.
Tecnoflon® (FKM & FFKM)

Melt processable Fluoropolymers
Materials for sealing, tubing, wire insulation, tapes, fibres, or membranes, with exceptional properties such as high temperature endurance, outstanding chemical and corrosion resistance, excellent flame resistance and weatherability.
Aquivion™ (PFSA) - Halar® (ECTFE) - Hyflon (PFA & MFA) - Hylar® (PVDF) - Solef® (PVDF) - Solvene™(EAP)

Non-Melt processable Fluoropolymers
Algoflon (PTFE) - Polymist® (PTFE)

Other Semi-Crystallines
Excellent stiffness and strength, broad chemical resistance, good fatigue resistance, short-term thermal capability from -40°C to 300°C and a higher melt flow.
Primef® (PPS) - Xydar® (LCP) 

Polymers Processing Aids (PPA)
Additives to increase papers fat repellency, to decrease the surface energy of textiles or metal and PPA for the reduction of the melt fracture or dye build-up
Solef® 11010 PVDF - Tecnoflon® NM (FKM)

PVDC
Smart barrier polymer.
Diofan® (PVDC)  - Ixan® (PVDC)

Silane Crosslinkable HDPE
PEX compounds for pipe & fitting and Low Smoke Halogen-Free-Flame-Retardant (LS0H), both thermoplastic & silane crosslinkable (XL) , flexible XL-Elastomer , XLPE, 'ambient curing' compounds for cables and pipes.
Cogegum® (EVA)  - Polidan® (PEX, XLPE) - Polidiemme® (EPR, EPDM)  

Solviva™     
Biomaterials polymers used in implantable medical devices.
Eviva™ (PSU) - Proniva™ (SRP) - Veriva™ (PPSU) - Zeniva™ (PEEK)

Sulfone Polymers
High performance amorphous plastics offering toughness and transparency, long term thermal stability from -40°C to 200°C, hydrolytic and dimensional stability and creep resistance.
Acude® (modified PPSU)  - Mindel® (modified PSU)  - Radel® A  - Radel® R (PPSU)  - Udel® (PSU) 

Ultra Polymers
High performance plastics offering the highest thermal performance, exceptional strength and stiffness, outstanding wear resistance, extreme hardness, broad chemical resistance and inherent flame resistance.
AvaSpire® (modified PEEK)  - EpiSpire® (HTS)  - KetaSpire® (PEEK)  - PrimoSpire® (SRP)  - Torlon® (PAI)